specification control drawing te connectivity 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: soldersleeve one step shield terminator, lead-free unless otherwise specified dimensions are in millim eters. [inches dimensions are shown in brackets] document no.: b-155-38xx tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev: b1 date: 16-apr-11 prepared by: l rodriguez dcr number: d060320 replaces: d050171 cage code : 06090 scale: --- size: a sheet: 1 of 1 print date: 9-may-11 ? 2005, 2011 tyco electronics corporation, a te connectivity ltd. company. all rights reserved. if this document is printed it becomes uncontrolled . check for the latest revision. product revisions product dimensions cable dimensio ns product name l max ?a min b max ?c min ?d min qty: item 2 b-155-3801 a 1.7 [0.065] 1.7 [[0.065] 0.9 [0.035] 0 .4 [0.015] 1 B-155-3802 b 26.0 [1.025) 1.95 [0.075] 1.95 [0.075] 1.1 [0.045] 0.6 [0.025] 1 b-155-3803 a 2.7 [0.105] 2.7 [0.105] 1.8 [0.070] 1. 3 [0.050] 1 b-155-3805 a 4.5 [0.180] 4.5 [0.180] 2.3 [0.090] 1. 8 [0.070] 1 b-155-3806 a 6.0 [0.235] 6.0 [0.235] 3.3 [0.130] 2. 8 [0.110] 1 b-155-3807 a 7.0 [0.275] 7.0 [0.275] 3.7 [0.145] 3. 2 [0.125] 1 b-155-3809 a 8.7 [0.340] 8.7 [0.340] 4.2 [0.165] 3. 7 [0.145] 2 b-155-3810 a 9.7 [0.382] 9.7 [0.382] 6.8 [0.268] 6. 0 [0.236] 2 b-155-3811 a 10.7 [0.420] 10.7 [0.420] 7.1 [0.280] 6.6 [0.260] 2 b-155-3813 a 42.0 [1.655] 13.0 [0.510] 13.0 [0.510] 8.9 [0.350] 8.4 [0.330] 1 material 1. insulation sleeve: heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. solder preform with flux: qty: see table (one so lder washer shown). solder: type sn42bi58 per ansi / j-std-00 6. flux: type rom1 per ansi / j-std-004. 3. meltable ring: thermally stabilized thermoplasti c. color: clear. 4. meltable ring: thermally stabilized thermoplasti c. color: blue. application 1. these controlled soldering devices are designed for termination of a bare or tin-plated copper shie ld on a cable, having an insulation rated for at least +85 ? c minimum. 2. temperature range: -55 ? c to +125 ? c. 3. when installed properly, it will meet the perfor mance requirements of te connectivity / raychem spe cification rt-1404. 4. for installation procedure and application equip ment consult rpip-824-00 or h54286. for best results, prepare the cable as shown:
|
